What are the patch methods of transparent LED display?

I believe everyone already knows about the traditional mounting methods of LED displays. The common ones are SMD, COB, etc., so what are the mounting methods for LED displays that are not the same as transparent LED displays? Next, let’s take a look at the patch methods of transparent LED display.

There are mainly 4 types of transparent LED display patch methods:

The front side of the light-emitting lamp bead is attached to the groove

Dig the notch on the side of the PCB according to the size of the lamp bead, and stick the lamp bead tightly to the position inside the notch slot on the side

The surface of the front light-emitting lamp beads is attached to the side

Thicken the thickness of the PCB board (the thickness of the board is greater than or equal to the size of the lamp bead pad), and the lamp bead is floating on the thickness of the PCB board

Side luminous lamp bead is attached to the way

An LED lamp bead with a 90° angle between the light-emitting chip and the bonding pad. The lamp bead is attached to the surface of the PCB. Unlike the above two light-emitting modes, this is a side-emitting lamp bead patch method.

Front-side luminous lamp beads front patch method

Cut out the PCB as much as possible except for the position of the lamp beads to increase the light transmittance of the display panel by hollowing out

The transparent LED display is currently under high competition pressure and there are many manufacturers. It is important to give priority to the transparent LED display manufacturers with low price, high quality and good reputation. For example, HOLA-LED in China is a professional transparent screen manufacturer. The transparent LED display produced by it has the following characteristics:

High transparency

More than 80% of the perspective effect allows the glass to retain the function of daylighting perspective, and the existence of LED lights is almost invisible from a distance, so that the space near the glass curtain wall is not affected.

Sticker light design

The inner concave PCB board of the lamp beads not only has a mask protection function, but also improves the stability of the patch to prevent dead lights, and the playback effect is more stable. The appearance is neat and exquisite. The power cable is built-in, which makes the whole screen look exquisite and generous.

No need for steel frame structure, saving a lot of cost

It is directly pasted on the glass curtain wall without changing any building structure. The module is pasted on the back of the glass curtain wall with special glue, and it can be cured in 10 seconds, which is convenient and fast. Not to mention complicated supporting steel frame, which can save a lot of installation costs.

Easy and fast maintenance

Indoor maintenance is fast and safe, saving manpower and material resources.

Save building lighting costs

If the LED glass curtain wall display is installed, a large part of the lighting lamps on the external wall can be saved. At the same time, the LED screen is more absorbing, which can save costs and benefit from advertising.

Energy saving and environmental protection

There is no need for traditional refrigeration systems and air conditioning to dissipate heat, and the LED display has lower power consumption than traditional lighting, so it is more energy-saving and environmentally friendly.

easy to use

The display content can be changed at any time through a network cable or a computer, or a graphics card, or a remote transceiver.

Wide range of applications

As long as there is a glass curtain wall, this product can be applied to banks, shopping malls, theaters, commercial streets, chain stores, hotels, municipal public buildings, landmark buildings and so on.

Share:

Facebook
Twitter
Pinterest
LinkedIn
Hola LED